Rubble after renovation work, sawdust in the workshop, sand in the car or water spreading across the floor after a leak: a household vacuum is not made for that. That is the job of the wet and dry vacuum, also called a tank vacuum or shop vacuum. In this guide we explain how to choose the right model in Morocco for your use (garage, building site, car, water damage), which criteria to compare and what price to expect for a building-site vacuum.
Contents
Wet and dry vacuum: what are we talking about?
A wet and dry vacuum is built around a large tank on wheels, a powerful motor and a wide-diameter hose. Unlike a canister vacuum or a cordless stick vacuum, it is designed to swallow heavy debris and, on models made for it, liquids.
- Dry vacuuming: sanding dust, sawdust, plaster, light rubble, leaves, sand.
- Wet vacuuming: puddles, spilled water, rinse water from a terrace, water from a leak.
If you are rather looking for a vacuum for everyday home cleaning (rugs, tiles, pet hair), see our guide canister, cordless stick or robot vacuum: here we are talking about a DIY and heavy-duty cleaning tool.
Criteria for choosing well
1. Tank capacity
This is the first criterion. A small tank (around 12 L) is enough for the car and the garage. For a building site or a water leak, a 30 L tank limits trips to empty it. Beyond that (75 L tanks), we are talking about intensive use: large premises, workshops, renovation sites.
Be careful: with water, a tank fills quickly and becomes heavy (one litre of water weighs about one kilo). A well-filled 30 L tank already takes effort to empty.
2. Power and airflow
Power in watts shows the motor's consumption, but it is mainly the airflow (in m³/min) and the vacuum pressure (in kPa) that tell you whether the vacuum picks up heavy debris and water well. The higher these values, the stronger the suction.
3. Picking up liquids
Not all tank vacuums are rated for water. If you plan to vacuum liquids, choose a model explicitly sold as “wet and dry” and follow the manual for the filter setup in wet mode.
4. Ease of use
- Wheels to move the tank easily;
- A long enough cable to avoid extension leads, especially near water;
- Suitable nozzles: crevice tool for car corners, floor brush, wide nozzle for water.
Brico MIM tip: if you are torn between two sizes, think about your “dirtiest” use rather than the most frequent. A 30 L vacuum cleans a car just as well as a 12 L one; the reverse is not true on a building site or after a leak.
Models and prices in Morocco
Here are the tank vacuums available at Brico MIM, with the specifications stated on their product pages:
| Model | Tank | Power / airflow | Liquids | Price |
|---|---|---|---|---|
| TOTAL TVC14122 | 12 L | 800 W – 1.7 m³/min | Not stated on the product page | from 645 DH |
| TOTAL TVC14301 | 30 L | 1400 W – 1.9 m³/min – 16 to 18 kPa | Yes, wet and dry | from 1445 DH |
| TOTAL TVC24751 | 75 L | 2 × 1200 W – 3 m³/min – 16 to 17 kPa | Not stated on the product page | from 3035 DH |
TOTAL TVC14122 (12 L): the compact one for the car and garage
With its 800 W motor, 1.7 m³/min airflow and 12 L tank, it is the entry-level model, handy for the home, workshop and car. It stores easily in a corner of the garage.
TOTAL TVC14301 (30 L): the true “wet and dry”
This is the all-rounder: 1400 W, 1.9 m³/min, 16 to 18 kPa of vacuum pressure and a 30 L tank. Its product page clearly presents it for wet and dry cleaning: sanding dust, sawdust, light rubble, but also spilled water and puddles after a leak. It runs on 220–240 V mains power.
TOTAL TVC24751 (75 L): for large volumes
Two 1200 W motors, 3 m³/min of airflow, a 75 L tank and a 5.5 m cable: this model is aimed at large workshops, commercial premises and sites where you vacuum a lot without wanting to empty constantly.
See the full range in our vacuums collection.
Garage, building site, car, water damage: our tips by use
| Use | Recommended tank | Points to watch |
|---|---|---|
| Car | 12 to 30 L | Crevice tool for seat rails, long enough cable |
| Garage / workshop | 12 to 30 L | Sawdust, shavings, sanding dust: keep the filter clean |
| Building site / renovation | 30 to 75 L | Rubble and fine dust: empty and clean the filter often |
| Water damage | 30 L, wet and dry model | Power cut in the area, tank emptied regularly |
For the car
Beach sand, crumbs, dirt under the mats: a tank vacuum sucks much harder than a small handheld vacuum. Remove the mats and vacuum them separately, then run the crevice tool between the seats and in the door pockets. For the outside and the rims, a pressure washer completes the job (see our guide pressure washer: bar, flow rate, car and terrace).
For the garage and workshop
The tank vacuum is the natural partner of power tools: after drilling, cutting or sanding, it picks up sawdust and dust in a few minutes. If you often work with wood, also discover our sanders and our guide random orbital, finishing or belt sander.
For the building site
After tiling, plastering or light demolition work, first pick up the large debris with a shovel and broom, then finish with the vacuum. Very fine dust (plaster, cement) quickly clogs the filter: tap it or clean it regularly to keep good suction.
For water damage
Water heater leak, overflowing washing machine, seepage after a storm: a wet and dry vacuum such as the TVC14301 lets you recover water from the floor quickly. Proceed in this order:
- Cut the power to the affected area at the electrical panel if water has reached sockets or appliances.
- Stop the source of the leak (water inlet valve).
- Plug the vacuum into a dry socket, outside the flooded area.
- Vacuum starting from the deepest areas, and empty the tank as soon as it gets heavy.
- Ventilate and let the room dry.
If the volume of water is very large (cellar, basement, flooded garage), a pump is better suited than a vacuum: for example the Gardena 8600 clear-water submersible pump. See also our guide which pump to choose: booster, submersible or motor pump.
Brico MIM tip: after vacuuming water, empty the tank, rinse it and let it dry open before storing it. A tank closed while damp quickly develops bad smells, and a filter that is still wet clogs as soon as you vacuum dust again.
Safety and maintenance
- Never flammable liquids (petrol, solvents, thinner) or hot ashes in the vacuum.
- Dry hands and feet when plugging in and unplugging, and the cable out of the water. A circuit protected by a residual current device is strongly recommended (see our guide circuit breakers and residual current switches).
- Watch the tank level in wet mode and stop the machine if suction weakens or the sound changes.
- Filter: clean it regularly and follow the manual when switching from dry to wet mode.
- Storage: coil the cable without kinking it, store the hose without crushing it.
Frequently asked questions
What is the price of a building-site vacuum in Morocco?
At Brico MIM, tank vacuums start from 645 DH (TOTAL TVC14122, 12 L). The TOTAL TVC14301 wet and dry vacuum (30 L) starts from 1445 DH, and the large TOTAL TVC24751 (75 L) from 3035 DH.
Can any tank vacuum pick up water?
No. Only vacuum liquids with a model sold as “wet and dry”, such as the TOTAL TVC14301, and follow its manual. A standard household vacuum must never pick up water.
Which tank size should I choose?
12 L for the car and occasional garage use, 30 L for all-round use (building site, workshop, water leak), 75 L for large premises and major sites.
Can a wet and dry vacuum replace my household vacuum?
It can help out on tiled floors, but it is bulkier and noisier than a household vacuum. Most households keep both: a household vacuum for everyday cleaning, a tank vacuum for the garage, the car and DIY work.
Do you deliver everywhere in Morocco?
Yes, Brico MIM delivers to every city in Morocco, with cash on delivery.
Find your wet and dry vacuum
Tank vacuums for the garage, building site, car and water damage, delivered everywhere in Morocco with cash on delivery.
0 comments