Skip to product information
Coffret électrique encastré 16 modules 440 × 410 × 115 mm réf. 37810

Flush-mounted consumer unit 16 modules 440 × 410 × 115 mm ref. 37810

740.00 dh
Intervention rapide sous 24 à 48 heures
Livraison à domicile partout au Maroc
Support client 24h/24 et 7j/7
Satisfait ou remboursé sous 7 jours
Produit neuf, scellé et jamais activé

16-module flush-mounted electrical distribution board 440 × 410 × 115 mm ref. 37810

Flush-mounted distribution board, 16 modules, 440 × 410 × 115 mm, with a slot for the main circuit breaker.

Flush-mounted distribution board ref. 37810, 16-module capacity, dimensions 440 × 410 × 115 mm. It combines the main circuit breaker slot and the home's modular protection devices in a single niche. Its 16 modules are suitable for an apartment or a small house: lighting, sockets, kitchen, water heater, and one or two specific circuits, with some reserve space.

BrandBrico MIM TypeModular distribution board InstallationFlush-mounted

Key features

  • Distribution board for flush mounting in partition walls
  • 16-module capacity
  • Dimensions 440 × 410 × 115 mm
  • Combined distribution section and main circuit breaker slot
  • Recessing depth 115 mm
  • Manufacturer reference 37810

Main specifications

  • What 16 modules represent — A module is the unit of width for electrical switchgear: 17.5 mm. A miniature circuit breaker occupies one module, a residual current circuit breaker occupies two. With 16 modules, you can cover the circuits for an apartment — lighting, sockets, kitchen, water heater, air conditioner — while keeping two or three slots free for future expansion.
  • The 115 mm depth — This is the measurement that matters during initial planning: the wall niche must be at least this deep so the front panel sits flush with the wall. On thin partition walls, check the available thickness before starting; a board that protrudes by a few millimeters cannot be fixed with plaster alone.
  • Distribution and circuit breaker in one place — The designation indicates a combination board: main power supply and master switch on one side, protected output circuits on the other, all within the same housing. This avoids having to align two separate boards and creating two separate wall niches.
  • Installation — Create a niche in the partition, ensure the board is level, run the conduits through the top or bottom, apply plaster around it, and then wire it onto the DIN rails. Install it at eye level: the master switch must remain accessible without a stepladder, and the identification labels must be legible.
TypeModular distribution board
InstallationFlush-mounted
Number of modules16
Dimensions440 × 410 × 115 mm
Depth115 mm
ConfigurationDistribution section + main circuit breaker slot

Technical sheet

Characteristic Detail
Reference 37810
Type Modular distribution board
Installation Flush-mounted
Number of modules 16
Dimensions 440 × 410 × 115 mm
Depth 115 mm
Configuration Distribution section + main circuit breaker slot
Switchgear mounting DIN rail

Fast delivery & secure payment

Shipping throughout Morocco, with payment upon delivery. Our team is available via WhatsApp to assist with setup and choosing accessories.

Delivery 24–48hEverywhere in Morocco Cash on deliveryPay upon receipt Original Brico MIM productRef. COF-DIST+DISJ-16MOD-440*115-37810 WhatsApp Support7 days a week · free advice

Included in your purchase

  • 1 × Flush-mounted electrical board 16 modules 440 × 410 × 115 mm ref. 37810 Brico MIM (ref. COF-DIST+DISJ-16MOD-440*115-37810)

Brico MIM After-Sales Service

The product arrives new, in its original Brico MIM packaging. No warranty duration is communicated for this reference: we prefer not to state any figure rather than provide an unverifiable one.

Customer service via phone, WhatsApp, and email, Monday to Saturday.

Frequently asked questions

Are the protection devices delivered with the board?

The board is the housing and its mounting support. Circuit breakers and residual current devices are selected based on your installation; contact Brico MIM support via WhatsApp to find out exactly what this reference contains and to complete your list.

Are 16 modules enough for a house?

For an apartment, yes in most cases. For a multi-level house or one with many circuits, aim for a higher capacity. If in doubt, send your circuit list to Brico MIM support on WhatsApp.

Can it be installed as a surface-mount?

No, this model is designed for flush mounting. If your wall does not allow for a recess, ask Brico MIM support via WhatsApp for the equivalent surface-mount model.

What is the delivery time?

24 to 48 hours for the Casablanca–Rabat axis, 48 to 72 hours for other cities in Morocco.

Order now on Brico MIM

16-module flush-mounted electrical board 440 × 410 × 115 mm ref. 37810 Brico MIM for 740.00 MAD — fast delivery everywhere in Morocco, cash on delivery, and Brico MIM after-sales service.

View store information

Flush-mounted consumer unit 16 modules 440 × 410 × 115 mm ref. 37810

Payment methods

    ★ Customer Reviews
    Authentic reviews received via WhatsApp will be published here after verification.


    You might also like