Flush-mounted electrical enclosure 23 modules 400 × 500 mm ref. 37814
Flush-mounted electrical enclosure 23 modules 400 × 500 mm ref. 37814
Flush-mounted distribution enclosure, 23 modules in 400 × 500 mm, with a dedicated slot for the main circuit breaker.
Flush-mounted distribution enclosure ref. 37814, 23-module capacity, 400 × 500 mm dimensions. It brings together in one place the incoming supply protected by the main circuit breaker and the modular protection devices for the home: residual current circuit breakers, miniature circuit breakers, and any potential contactors. Recessed into the partition, it sits flush with the wall and is closed by a door—this is the standard mounting method in a new build or a renovation where the plasterwork is being redone.
Highlights
- Distribution enclosure for flush-mounting in the partition
- 23-module capacity
- Dimensions 400 × 500 mm
- Distribution section and main circuit breaker slot combined
- Modular equipment mounted on DIN rail
- Manufacturer reference 37814
Main features
- What 23 modules represent — The module is the width unit for electrical equipment: 17.5 mm. A miniature circuit breaker takes up one module, a residual current circuit breaker takes up two, and a contactor or timer may take up more. With 23 modules, you can cover the lighting, outlets, kitchen, water heater, and air conditioning for a home, while keeping a few spots free for future additions.
- Flush-mounted vs. surface-mounted — When flush-mounted, the enclosure is housed in a dedicated space in the partition, with only the front face remaining visible. It is neater than a surface-mounted enclosure, but this must be decided before finishing work: once the wall is plastered and painted, cutting out an opening of this size is a major project.
- Distribution and circuit breaker in one place — The designation of this reference implies a distribution section and a circuit breaker section. The advantage is practical: the meter supply, main power cut-off, and the home's distribution lines are all located in the same niche, without the need to align two separate enclosures on the wall.
- Installation — Reserve the space in the partition, level the enclosure—a crooked panel is always noticeable—route the conduits through the top or bottom, and then plaster around it. The rails and wiring are done afterward, with the enclosure in place. Choose a height that allows the main cut-off to be accessible without needing a stepladder.
Technical sheet
| Characteristic | Detail |
|---|---|
| Reference | 37814 |
| Type | Modular distribution enclosure |
| Mounting | Flush-mounted |
| Number of modules | 23 |
| Dimensions | 400 × 500 mm |
| Configuration | Distribution section + main circuit breaker slot |
| Equipment support | DIN rail |
| Usage | Electrical panel for homes or premises |
Fast delivery & secure payment
Shipping throughout Morocco, with payment upon receipt. Our team is available on WhatsApp to assist you with setup and selecting accessories.
Included in your purchase
- 1 × Flush-mounted electrical enclosure 23 modules 400 × 500 mm ref. 37814 Brico MIM (ref. COF-DIS-23MOD-400*500-37814)
Brico MIM after-sales service
The product reaches you brand new, in its original Brico MIM packaging. No warranty duration is specified for this reference: we prefer to say nothing rather than provide an unverifiable figure.
Customer service via phone, WhatsApp, and email, from Monday to Saturday.
Frequently asked questions
Are the circuit breakers and the RCD provided?
The enclosure is the housing part: rails, earth and neutral terminals depending on the model, but the protection devices should be chosen according to your installation. To know exactly what is delivered with this reference and complete the list, write to Brico MIM support on WhatsApp.
Is 23 modules enough for my house?
Count one module per protected circuit, two per residual current circuit breaker, and leave about a third of the spaces free for future additions. If you are hesitant between this capacity and a larger model, send the list of your circuits to Brico MIM support on WhatsApp.
What recess depth should be planned in the wall?
The flush-mounting depth is not specified for this reference. Ask Brico MIM support on WhatsApp before creating the recess: it is better to know before cutting into the partition.
What is the delivery time?
24 to 48 hours on the Casablanca–Rabat route, 48 to 72 hours for other cities in Morocco.
Order now on Brico MIM
Flush-mounted electrical enclosure 23 modules 400 × 500 mm ref. 37814 Brico MIM at 880.00 MAD — fast delivery everywhere in Morocco, payment on delivery, and Brico MIM after-sales service.
Pickup currently not available
★ Customer Reviews
Authentic reviews received via WhatsApp will be published here after verification.
You might also like